Primers

Prokol Protective Coatings USA has a diverse range of products. Below are a selection of our most popular items. Contact Us for details of applications, coverage, and cost. 
GET IN TOUCH

ProFast Primer N

Product Sheet
Safety Sheets

Description and Application

Solvent-free, autocatalytic, quick-curing, pigmented primer based on polyurea resins.

Suitable as a fast-curing primer on both dry and moist mineral surfaces (<10%), wood and metal. This primer has brilliant sealing properties and will, in most cases, seal the surface after only one application. ProFast Primer N is concrete grey of colour.

The short recoat time of 75 minutes on average makes it possible to apply a sealing layer of ProFast Primer N as well as a self-levelling screed, coating or hotspray system on the same day. This will save you products and money, especially on smaller surfaces up to 200 m². For the time being it may not be used as a primer in basins and swimming pools (suitability study is still ongoing).

Characteristics

• Shrink-proof and fully solvent-free
• Fast-curing
• Seals highly porous surfaces
• Suitable for both indoor and outdoor use
• Adheres to both dry and moist surfaces up to a moisture level of 10%
• Can be recoated with coatings, cast flooring and hotsprays after 1 hour

ProFast Primer RW

Product Sheet
Safety Sheets

Description and Application

An all-purpose, autocatalytic, coloured primer based on polyurea resins with rust-inhibiting and quick-curing properties.

Suitable for both dry and slightly damp mineral surfaces (<10%), wood and metals. Also, under certain conditions, suitable for aluminium and stainless steel.

Characteristics

• Corrosion resistant
• Shrink resistant
• Fast curing
• Suitable for both indoor and outdoor use
• Adheres to dry and wet mineral surfaces < 10% parts by weights

ProFast Multi TR

Product Sheet
Safety Sheets

Description and Application

Quick-curing, autocatalytic, 2-component, solvent-free, polyurea resin for universal use. ProFast Multi-TR can be applied on mechanical, thermal and chemical loaded surfaces.

Characteristics

• Highly versatile
• Extremely fast curing
• Completely solvent-free
• Resistant against plasticisers and hot strips
• Highly resistant against various chemicals
• Fully UV-proof and will not turn yellow

Rocathaan Primer C

Product Sheet
Safety Sheets

Description and Application

Rocathaan Primer C is a 2-component, solvent-free, highly reactive primer based on polyurethane. This primer is suitable for mineral surfaces.

In addition to applying with a brush, roller or airless spraying, this primer can also be applied by using of hotspray technology

Characteristics

Can be applied with a brush, roller, airless or hotspray technology.

Rocathaan Primer UNI

Product Sheet
Safety Sheets

Description and Application

Universal, 2-component, solvent-containing, polyurethane primer with a very long application time and a short drying time for smooth and slightly porous surfaces.

As a particularly well adhering primer on a very wide range of surfaces such as wood, many synthetic materials, aluminium and steel (in the case of steel, it is recommended to apply an rust-inhibiting primer type: Rocathaan Primer UNI-RW) also on most non-oligomeric synthetics. Do not apply to surfaces that are highly sensitive to solvents.

Characteristics

• Easy to apply
• Short curing time and long application time
• Universally applicable on most surfaces

Rocathaan Primer UNI-RW

Product Sheet
Safety Sheets

Description and Application

Universal, 2-component, solvent-containing primer with rust-inhibiting properties. This primer has a very long application time and a quick-curing time for smooth and slightly porous surfaces.

As a particularly well adhering primer on steel. Do not apply to surfaces that are highly sensitive to solvents.

Characteristics

• Rust-inhibiting
• Easy to apply
• Short curing time and long application time
• Universally applicable on most surfaces

Rocathaan Primer OV

Product Sheet
Safety Sheets

Description and Application

Rocathaan Primer OV is a 2-component, solvent free, polyurethane primer.

As a primer for old asphalt, bituminous and cement-bound surfaces in combination with Rocathan products. Suitable for light to medium loads.

Characteristics

• Application by using a roller or brush
• Solvent-free

Rocapox EP Primer ELT

Product Sheet
Safety Sheets

Description and Application

2-component, low solvent, transparent primer with an epoxy resin base and low viscosity (penetrating deeply into the surface).

This primer is suitable for mineral surfaces such as concrete, sand-cement screeds, cement plaster, etc. with very good adhesion abilities.

Characteristics

• Low-solvent
• Easy to apply with roller and brush
• Good adhesion properties
• High penetrating properties

Rocapox Primer GV-M

Product Sheet
Safety Sheets

Description and Application

2-component, solvent-free, transparent primer based on an epoxy resin combination for mineral surfaces. Rocapox Primer GV-M adheres well to various surfaces including wood.

This primer can also be used to form a screed layer where an extra substance is added after the two components have been mixed together.

Characteristics

• Easy to apply with brush, roller or airless
• Completely solvent-free
• Good sealing properties
• Low viscosity
• Suitable for both indoor and outdoor use

Rocapox Primer GV-M TX

Product Sheet
Safety Sheets

Description and Application

2-component, solvent-free, transparent primer based on an epoxy resin combination for mineral surfaces. Rocapox Primer GV-M TX adheres well to various surfaces including wood. This primer can also be used to form a screed layer where an extra substance is added after the two components have been mixed together.

This primer is modified and contains a special additive that greatly improves the adhesion strength on mineral surfaces and metal. Rocapox Primer GV-M TX is somewhat tolerant to moisture and pollution from oil and grease from the surface.

Characteristics

• Easy to apply with brush, roller or airless
• Completely solvent-free
• Good sealing properties
• Low viscosity
• Suitable for both indoor and outdoor use

Rocapox Primer WD-500

Product Sheet
Safety Sheets

Description and Application

Impregnating primer based on waterborne epoxy for all stony surfaces. Forms the base for most synthetic floor coatings.

Characteristics

• Wear-resistant
• Dilutable with water
• Very effective
• Almost odourless

Rocapox Epoxy Gel

Product Sheet
Safety Sheets

Description and Application

Rocapox Epoxy Gel is a thixotropic paste based on solvent-free epoxy resins and is white of colour.

• Improves rheology and application properties of epoxy coatings, mortars and trowel floors.
• Reduces sagging on vertical surfaces.
• Suitable as sealing for open pores and pinholes in concrete but may not be used as a watertight system.
• Improves the application properties of trowel floors.
• By adding fillers such as talcum or micro-balloons an easy to apply epoxy filler can be formulated.

Characteristics

• Easy to apply with a trowel
• No shrinkage because the product is solvent-free

Rocapox Resin 100

Product Sheet
Safety Sheets

Description and Application

2-component, solvent-free, defoaming, epoxy resin combination based on bisphenol A-F resin for universal use. Rocapox Resin 100 is particularly suitable as:

• Primer underneath epoxy or polyurethane-based synthetic floors as well as under hotspray coatings including Rocathaan Hotspray PA 136-T. • A screed layer may also be necessary. A closed surface is necessary.
• Screed layer which is mixed with quartz sand in a ratio of 1 part mixed epoxy and 2 to 3 parts quartz sand 0,1 – 0,3 mm.
• Transparent sealing on mineral surfaces, mortars and trowels.
• A trowel resin in combination with (coloured) quartz materials.
• A self-levelling screed in combination with coloured quartz materials 1:4 to 1:6.
• A primer and/or screed and as a first wet-on-wet layer under trowels, casting trowels and repairing mortars.
• This resin is also available in a TX variant which is modified and contains a special additive that greatly improves the adhesion strength on mineral and metal surfaces. Rocapox Resin 100 TX is somewhat tolerant to moister and contamination by oil and grease in the surface.

Characteristics

• Completely solvent-free.
• Defoaming
• Good chemical resistant
• Easy to apply
• Good adhesion on mineral surfaces
• Low viscosity
• For universal use

Rocapox Resin 100 TX

Product Sheet
Safety Sheets

Description and Application

2-component, solvent-free, defoaming, epoxy resin combination based on bisphenol A-F resin for universal use. Rocapox Resin 100-TX contains a special additive that greatly improves the adhesion strength and makes it somewhat tolerant to moisture and pollution from oil and grease from the surface.

• Primer underneath epoxy or polyurethane-based synthetic floors as well as under hotspray coatings including Rocathaan Hotspray PA 136-T. • A screed layer may also be necessary. A closed surface is necessary.
• Screed layer which is mixed with quartz sand in a ratio of 1 part mixed epoxy and 2 to 3 parts quartz sand 0,1 – 0,3 mm.
• Transparent sealing on mineral surfaces, mortars and trowels.
• A trowel resin in combination with (coloured) quartz materials.
• A self-levelling screed in combination with coloured quartz materials 1:4 to 1:6.
• A primer and/or screed and as a first wet-on-wet layer under trowels, casting trowels and repairing mortars.

Characteristics

• Completely solvent-free
• Defoaming
• Good chemical resistant
• Easy to apply
• Good adhesion on mineral surfaces
• Low viscosity
• For universal use
• Strong adhesion properties (TX)

TX Adhesion Promotor

Product Sheet
Safety Sheets

Description and Application

TX Adhesion Promotor is used as an adhesion enhancer on: glass, varnished surfaces, aluminium, steel, old galvanized materials etc. This promotor displaces (limited) moisture in mineral surfaces and is also (limited) effective in the case of surfaces contaminated with silicones.

Improves the wet and dry adhesion of reactive synthetics such as polyurethane and epoxy systems on various surfaces. TX Adhesion Promotor is not visible.


Prokol Protective Coatings USA are a proud member of the Prokol Coating Group
©2023 by Prokol Protective Coatings USA 
Web Development by Kyber Digital

Privacy Policy
Mon - Fri
9:00am - 6:00pm